Buehler 1.13.043.027 40mm diameter PMDC motor w/encoder - Lot of 7

Description

Buehler 1.13.043.027 40mm diameter PMDC motor w/encoder.  I tested each one with 12V supply in both directions.  I did not test the encoders, but would assume they work.  Four tapped holes in shaft end, 4mmx0.7.  Pulleys have been installed with loctite, will need to be pressed off, shaft diameter is 4mm and 14mm long.  Two motors have connectors for encoder included, one motor has longer leads, but no connector for power - pulley flange on this motor has damage (see pic).  I don't have specs on encoder, but am thinking they may be either 128 or 256 pulses/rev, A & B channels, 5 volts.  These were surplus from HP robotic storage servers.
You will receive all seven motors.  Message me if you need any additional details.