1 hp 90 volt electric permanent magnet DC motor / generator 2999 RPM 12mm shaft

Description

Manta motor Etek type PMG Permanent Magnet Generator MAKE BUILD ELECTRIC CARS VEHICLES PANCAKE ELECTRIC MOTORS etek ELECTRIC ETEC MOTOR CYCLE PMG Permanent Magnet generator PMA wind turbine hydro power wind turbines mills Etek
GREAT FOR
PROJECTS
You are bidding on a 1 HP / 90 Volt DC / 800 Watt peak electric motor.
Very powerful for it's size.
Can also be used for powering
electric
karts and bikes.
Can also be used for making Electricity (needs diode)
and changing a battery.
90 volt DC version great for DC water pumps and hydraulic motors
https://youtu.be/PzDN_jmQvzo
Specifications:
Motor length
3.5" diameter / 6" long.
7.5" over all length including shaft
(800W peak)
-
Peak Amps is Watts divided by volts.  W ÷ V = A
12mm shaft with 1.75 pitch threads with flat slot at shaft tip.
Shaft is 1.5" long with 3/4" long threaded end and
threaded end is
12mm/1.75 pitch by 3/4" long, 1.5" total shaft
length
.
Two 5/16" extra large mounting holes on the front of the motor.
5/16" NCT mounting holes are 2.874" from center to center (74mm)
3000 rpm  / continuous duty at 75% of peak wattage.
3800 rpm  / continuous duty at 99% of peak wattage.
Heavy 12 AWG wire to handle the amps.
A put-up and forget design! Expect decades of dependable service life.
Rain, ice and weather resistant electronics in sealed case (not for under water)
Long life graphite brushes.
We sell replacement brushes and bearings.
Works for both CW or CCW rotations.
Epoxy/Lam rotor efficiency = 94.6%
(Brushed motors convert more electricity into usable horsepower)
Weighs ONLY 8.5 lbs.  (Almost 100 Watts Per Pound !)
Can be used as a generator, makes power when turned
(Requires 100 amp blocking diode)
THIS IS NOT A 3/4" Diameter SHAFT.
PRODUCT IDEAS
BUILD ELECTRIC CARS / INVENT ELECTRIC BOATS / DESIGN ELECTRIC MOTORCYCLES / MINI BIKES /  GO KARTS / POWERED BICYCLES and WIND TURBINEs
We want you to use these motors in your product designs to help mankind
as we slowly run out of cheap fossil fuels -  Electricity is the future.
HOW TO MAKE A TREAD MILL MOTOR WIND TURBINE
"Love these blades you were right, wow can they turn on, im getting up to 40
volts out of my indiana general dv pm motor,there scarey sometimes, im
putting it on youtube for all to see, thanks again"
-uptick57
wind generator homemade - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
https://youtu.be/WCkpjHPna-Y